Industrial spray unit 
two-substance

SCHLICK has developed the Industrial spray unit two-substance for industrial applications where two-substance nozzles are used.

It is used in hard-to-reach working areas and is the perfect connection between the two-substance nozzle and the supply unit (Industrial media connector).

Internal or external mixing two-substance nozzles are used.

Applications

More details

Industrial spray unit with two-substance nozzles –
Tried and tested in numerous industrial sectors

  • Specially designed solutions for supply unit with two-substance nozzles
  • Including protective supply pipe; also available with casing pipe or heating/cooling circuit
  • Customer-specific designs for all industrial sectors
  • Comprehensive QMS also for individual configurations in the SCHLICK Test & Research Center

SCHLICK industrial two-substance spray units are available in very varied configurations and can be manufactured or adapted to customer specifications for the desired industrial application. SCHLICK industrial two-substance spray unit, the version with a two-substance nozzle or nozzles, is available in a wide variety of designs with a range of different two-substance nozzles. A liquid control range of 1: 10 (if required 1: 30) can implemented. The droplet size can be individually adjusted according to the propellant/liquid ratio. 

The supply unit, which is made of acid-resistant stainless steel as standard, is manufactured to the customer's requirements in terms of length and design and is firmly connected to the two-substance nozzle.

SCHLICK two-substance nozzles are not susceptible to blockages. With external mixing systems, both components are only mixed at the nozzle exit, producing an easier control system. With internal mixing, the liquid and atomisation medium are mixed within a mixing chamber. The control requirements of internal mixing systems are slightly greater. 

Materials: Acid-resistant stainless steel, heat-resistant stainless steel, titanium, hastelloy, inconel, PTFE, PP, PVC, PVDF, other materials on request.

Professional Cleaning and Service

Product videos

Publications

  • Atomisation technology for cigarette production

    Moistening, casing and flavouring

    For decades, Düsen-Schlick has been supplying systems manufacturers and cigarette producers with process-optimised atomisation technology. Moistening and flavouring are core processes in the primary stage of tobacco processing. These are ultimately responsible for the flavour and quality of the final product. Properly measuring flavouring additives and uniformly moistening leaves and ribs ensure optimum cutting and drying properties. This also creates benefits for the downstream (secondary) stage of cigarette production.

    Read more
  • Brilliant Droplets

    Nozzles and injection lances in use with flue gas denitrogenation installations

    The SNCR and SCR procedures were developed for flue gas denitrogenation in order to meet the strict air purification requirements. Injection lances for the defined insertion of the reducing agent are an important component of both processes. These differ in their structural and procedural design depending on the application.

    Read more
  • In fine vapors

    Atomisation technology in nitrogen oxide reduction using urea

    During flue gas denitrogenation, the addition of a reducing agent is used to transform nitrogen oxides into a substance that can be emitted without causing any damage or can be used again. The reducing agent ammonia is increasingly being replaced by innocuous urea. However, urea has a tendency to crystallise during atomisation. When observing the nozzle systems used in urea atomisation, it can be seen that trouble-free operation is not always guaranteed.

    Read more
  • A question of distribution

    Superheated steam cooling in industrial use

    Due to poor or incomplete combustion of the medium, soot is produced, and at the same time the emission values in the combustion chamber increase. With liquid fuels, combustion al­ways takes place in the gas phase: The liquid fuel is first atomised, then vaporised, mixed with air, and finally burned in the gas phase. This article shows how atomisation can be influenced by various special nozzles.

    Read more
  • And it burns

    Nozzle systems used in combustion processes

    Due to poor or incomplete combustion of the medium, soot is produced, and at the same time the emission values in the combustion chamber increase. With liquid fuels, combustion al­ways takes place in the gas phase: The liquid fuel is first atomised, then vaporised, mixed with air, and finally burned in the gas phase. This article shows how atomisation can be influenced by various special nozzles ...

    Read more

Your application, our nozzle.
Our promise: living for solutions.

Consultation, engineering, production and testing
At SCHLICK, you get everything from one source.
The ideal solution for your application.

More details

Phone +49 9565 9481-0
Mail info(at)myschlick.com