PCA model
951 form 7-1 S24 ABC

Spray pattern: oval flat spray
Spray angle: approx. 60°
Orifices: 0.5 mm
Capacity: 1 – 10 g/min (coating)
Drum size: 8.5“ – 12“


More details


For flow rates of 1–10 g/min –
the SCHLICK Professional Coating Arm with Nano ABC nozzle 

  • No product build-up thanks to the SCHLICK Anti-Bearding Cap (ABC)
  • Perfect up- and downscaling for perfect production processes
  • Optimal homogenous and reproducible spray results
  • GMP design: Simple construction (7 individual parts + 4 O rings)
  • Cleaning needle to standard
  • Available with liquid return system
  • Extremely easy to adjust for maximum flexibility

SCHLICK Nano nozzle ABC 951 model, design 7-1 S24: the special variant of the proven Nano ABC nozzle for mounting on the PCA via screw connection. All media are fed through the specially developed PCA connection. There are no further connectors; dirt-gathering corners are avoided.

ATEX version for PCA nozzles also available.

Materials: FDA compliant 1.4404 (AISI 316L) materials / Titan 3.7035, surface quality: Ra < 0.8. Other materials available on request.

The SCHLICK Nano ABC nozzle combines all the features of the SCHLICK ABC-Technology®. Specially developed for atomising the smallest quantities, the Nano nozzle is perfect for conducting initial tests on table-top devices.

Thanks to the SCHLICK Anti-Bearding Cap (ABC) the sticking and build-up of deposits is prevented as far as possible. The GMP design also enables a very simple installation/de-installation for cleaning or servicing by hand. This leads to low maintenance requirements and considerable cost savings.

The model 951 form 7-1 S24 Nano ABC is designed with separate attachments for the pattern air (PA) and the atomising air (AA). So, there is more freedom for adjustment. Drop size and spray angle are easily adjusted via air pressure. The bore holes for liquid operation are produced with 0.5 mm. The Nano ABC nozzle is also available with liquid return system.

Professional Cleaning and Service



  • Say Goodbye to Blockages

    Use of anti-bearding cap nozzles in fluidised bed systems

    Blocked spray nozzles are a widespread problem in fluidised bed systems in which very fine or tacky products are processed. By using ABC nozzles, the pharmaceutical excipient manufacturer DMV Fonterra Excipients has succeeded in avoiding unplanned downtimes. Düsen-Schlick Anti-bearding cap technology (ABC nozzles) is well-established in the field of tablet coatings.

    Read more
  • Nozzle ABCs for power users

    State-of-the-art nozzle technology enhances tablet coating productivity

    Improved spray arm design and advanced nozzle systems cut set up time in half on state-of-the-art tablet coaters. This has big advantages for contract manufacturers who have find efficient ways of dealing with frequent changeover.

    Read more
  • Process Engineering & Optimisation:

    Perfect atomisation without bearding

    Anti-bearding air cap ensures that droplets are well distributed, and that coating and moistening are homogenous. The type of nozzle used for coating and moistening determines the process result. Normally, flat spray two-substance nozzles are used for this process. A new, robust air cap withstands even the most adverse operating conditions and thus ensures a clean spraying process with the ideal drop size.

    Read more
  • No weakness

    More operational safety in tablet coating

    In the pharmaceutical industry, flat spray two-substance nozzles are used in coating drums for the coating of pharmaceutical products. If possible, the coating process should not be interrupted for economical reasons. In addition to the geometry of the coater, the drying air and the spraying liquid, the nozzles play a particularly important role in this process. A new nozzle with an antibearding cap (ABC-Technology®) meets the requirement for operating security and improved handling during coating.

    Read more
  • Doubling spray rates

    New coating arm for tablet coater

    In tablet production, coating processes require a lot of manual operation and experience: The spray arms and nozzles that are used have to be constantly checked, and the spraying process variables require careful adjustment. A new nozzle and spray arm concept now allows you to achieve considerably more efficient processes.

    Read more
  • Spray with sense

    New nozzle technology ensures better efficiency in tablet coating

    Time and again conventional spray arms cause trouble when coating tablets. They are often difficult to clean and are not easy to inspect. The result is a disruption to the process flow and unnecessarily long set-up times. A new spray arm concept promises to improve this situation.

    Read more

Your application.
Our nozzle.
Our promise: living for solutions.

Consultation, engineering, production and testing.
At SCHLICK, you get everything from one source.
The ideal solution for your application.

More details

Phone +49 9565 9481-0
Mail info(at)myschlick.com