PCA model 930 ABC

Spray pattern: oval flat spray 
Spray angle: approx. 60°
Orifices: 0.5 – 2.2 mm
Capacity: 30 – 180 g/min (coating)
Drum size: 19“ and bigger


More details

Efficiency in the coating process –
the SCHLICK Professional Coating Arm 930 ABC

  • No product build-up thanks to the SCHLICK Anti-Bearding Cap (ABC)
  • Perfect up- and downscaling for perfect production processes
  • Optimal homogenous and reproducible spray results 
  • GMP design: Simple construction with 7 individual parts + O-rings (EPDM)
  • Cleaning needle to standard
  • Available with liquid return system
  • Extremely easy to adjust for maximum flexibility

SCHLICK 930 model, design 7-1 S37: the special variant of the proven ABC 930 model, design 7-1 S35 for mounting on the PCA with only two screws. All media are fed through the specially developed PCA connection. There are no further connectors; dirt-gathering corners are avoided.

Thanks to the SCHLICK Anti-Bearding Cap (ABC) the sticking and build-up of deposits is prevented as far as possible. The GMP design also enables a very simple installation/de-installation for cleaning or servicing by hand. This leads to shorter downtimes and more efficiency in production.

The production nozzle model 930 Form 7-1 S37 ABC is designed with separate attachments for the pattern air (PA) and the atomising air (AA). So, there is more freedom for adjustment. Using the air pressure there are equally as simple and reproducible settings for the droplet size and the spray angle. For the first time upscaling from laboratory to production is possible due to the use of ABC-Technology® throughout.

Standard bore holes for liquid operation are available with 0.5 / 0.8 / 1.0 / 1.2 / 1.5 / 1.8 / 2.0 / 2.2 mm.

ATEX version for PCA nozzles also available.

Materials: FDA compliant 1.4404 (AISI 316L) materials / Titan 3.7035, surface quality: Ra < 0.8. Other materials available on request.


SCHLICK offers a compact flat gasket solution instead of single O-rings for PCA nozzles of the 930 model series. This is our answer on all requests to reduce process times and at the same time to increase product safety. The flat gasket solution replaces all five O-rings of the nozzle, which create the contact surface to the Professional Coating Arm. Due to its intelligent design,  it cannot be mounted incorrectly and is easy for the user to grasp and insert by hand.

Professional Cleaning and Service

Product videos



  • Say Goodbye to Blockages

    Use of anti-bearding cap nozzles in fluidised bed systems

    Blocked spray nozzles are a widespread problem in fluidised bed systems in which very fine or tacky products are processed. By using ABC nozzles, the pharmaceutical excipient manufacturer DMV Fonterra Excipients has succeeded in avoiding unplanned downtimes. Düsen-Schlick Anti-bearding cap technology (ABC nozzles) is well-established in the field of tablet coatings.

    Read more
  • Nozzle ABCs for power users

    State-of-the-art nozzle technology enhances tablet coating productivity

    Improved spray arm design and advanced nozzle systems cut set up time in half on state-of-the-art tablet coaters. This has big advantages for contract manufacturers who have find efficient ways of dealing with frequent changeover.

    Read more
  • No weakness

    More operational safety in tablet coating

    In the pharmaceutical industry, flat spray two-substance nozzles are used in coating drums for the coating of pharmaceutical products. If possible, the coating process should not be interrupted for economical reasons. In addition to the geometry of the coater, the drying air and the spraying liquid, the nozzles play a particularly important role in this process. A new nozzle with an antibearding cap (ABC-Technology®) meets the requirement for operating security and improved handling during coating.

    Read more
  • Process Engineering & Optimisation:

    Perfect atomisation without bearding

    Anti-bearding air cap ensures that droplets are well distributed, and that coating and moistening are homogenous. The type of nozzle used for coating and moistening determines the process result. Normally, flat spray two-substance nozzles are used for this process. A new, robust air cap withstands even the most adverse operating conditions and thus ensures a clean spraying process with the ideal drop size.

    Read more
  • Spray with sense

    New nozzle technology ensures better efficiency in tablet coating

    Time and again conventional spray arms cause trouble when coating tablets. They are often difficult to clean and are not easy to inspect. The result is a disruption to the process flow and unnecessarily long set-up times. A new spray arm concept promises to improve this situation.

    Read more

Your application.
Our nozzle.
Our promise: living for solutions.

Consultation, engineering, production and testing.
At SCHLICK, you get everything from one source.
The ideal solution for your application.

More details

Phone +49 9565 9481-0
Mail info(at)myschlick.com