Model 970

Spray pattern: 
circular full-cone (standard air cap)
oval flat spray (flat spray cap)

Spray angle:
approx. 10° – 40° (standard air cap)
max. 70° (flat spray cap)

Droplet size: 10 – 50 μm
Orifices: 0.5 - 1.2 mm
Capacity: 0.05 – 0.5 l/min
Atomizing air pressure: from 0.3 bar

Applications

More details

THE ultimate nozzle specially for the lab –
the SCHLICK Module System Range 970

  • The standard air cap and flat spray cap can be quickly and simply changed by hand
  • Finest atomization with drop size smaller than 10 micrometres possible
  • Optimal spray result through precision adjustment of the air flow rate
  • Extremely easy to adjust for maximum flexibility
  • Significant reduction in maintenance downtimes thanks to easy access to all components
  • Wide range of installation options thanks to modular construction
  • Functional components with a surface quality of Ra < 0.8 (also available as designs conforming to FDA)

External-mix two-substance nozzles allow independent control of the flow rate and fineness of the atomization. The flow rate for all models is controlled through the liquid pressure difference. In the model with a regulating pin, the flow rate can also be regulated by the pin setting.

The SCHLICK model 970 is manufactured as a modular construction. This means that it can easily be rebuilt into other designs. Replacement parts are available for all individual parts, with reproducible results ensured.

Standard bore holes for liquid operation are available with 0.5 / 0.8 / 1.0 / 1.2 mm.
Customized bore sizes from 0.3 – 0.8 mm possible. Customized design S4 max. 1.2 mm

Materials: Acid resistant stainless steel, heat resistant stainless steel, brass, tantalum, titanium, hastelloy, inconel, PVC, PTFE, polypropylene, other materials available on request.

The air cap with scale enables the precision adjustment of the air flow rate for the atomization medium. Depending on the intended use, the required cap setting must be determined through trial and error. 

Cap setting 4 = normal setting

By turning the air cap backwards, the air flow rate is reduced and the scatter cone becomes more focused. By turning the air cap forwards, the air flow rate and scatter cone become larger.

All nozzle forms can also be delivered with extended liquid inserts. These optimise the atomization of tacky liquids and minimise build-up at the air expulsion hole.

Professional Cleaning and Service

Product videos

Forms

Publications

  • Atomisation technology for cigarette production

    Moistening, casing and flavouring

    For decades, Düsen-Schlick has been supplying systems manufacturers and cigarette producers with process-optimised atomisation technology. Moistening and flavouring are core processes in the primary stage of tobacco processing. These are ultimately responsible for the flavour and quality of the final product. Properly measuring flavouring additives and uniformly moistening leaves and ribs ensure optimum cutting and drying properties. This also creates benefits for the downstream (secondary) stage of cigarette production.

    Read more
  • And it burns

    Nozzle systems used in combustion processes

    Due to poor or incomplete combustion of the medium, soot is produced, and at the same time the emission values in the combustion chamber increase. With liquid fuels, combustion al­ways takes place in the gas phase: The liquid fuel is first atomised, then vaporised, mixed with air, and finally burned in the gas phase. This article shows how atomisation can be influenced by various special nozzles ...

    Read more

Your application, our nozzle.
Our promise: living for solutions.

Consultation, engineering, production and testing
At SCHLICK, you get everything from one source.
The ideal solution for your application.

More details

Phone +49 9565 9481-0
Mail info(at)myschlick.com