Model 822-854

Spray pattern: circular full-cone

Spray angle: 20° – 40°
(also adjustable through shaft position)

Droplet size: 20 – 200 μm
Orifices: 2.0 - 10.0 mm
Capacity: 0.3 – 40 l/min
Atomising air pressure: from 0.5 bar

Applications

More details

High performance for a range of viscosities –
the SCHLICK series 822-854

  • Especially developed as a basic model for the high performance end of the scale
  • Robust design with rear screw thread for easy fixing into flanges or container walls
  • Extremely easy installation/de-installation
  • Continuously adjustable setting of the scatter cone from 20–40° (adjustable through the shaft position)
  • Very wide range of applications  
  • A liquid control range of 1 : 10 is possible (under certain conditions also 1 : 30)
  • Functional components with a surface quality of Ra < 0.8

The performance range of the SCHLICK model series 822-854 begins at the upper limits of model series 940 and 970. Two-substance units are used throughout this range, where a large reaction or exchange surface is needed by large air flow rates.

External-mix two-substance nozzles allow independent control of the flow rate and fineness of the atomization. The flow rate for all models is controlled through the current liquid pressure difference. In the model with a regulating needle (design 1) the flow rate can also be regulated in accordance with the needle setting. There are two possible designs of nozzle system.

Design 0 with central liquid feed
The nozzle design without pre-atomisation is especially well suited to the atomisation of highly viscous media. Depending on the ability to regulate, the contamination risk and the viscosity, a full-cone swirl chamber or even a three-slotted swirl chamber can be fitted for atomisation. The three-slotted swirl chamber provides better pre-atomisation but is more susceptible to blockages. 

Design 1 with a liquid regulation needle
With design 1 the liquid flow can also be set using the liquid-regulating needle.

Standard orifices: 2.0 / 3.0 / 4.0 / 6.0 / 8.0 / 10.0 mm. Customized bore sizes on request.

Materials: Acid resistant stainless steel, heat resistant stainless steel, brass, titanium, hastelloy, inconel, other materials available on request.

Professional Cleaning and Service

Product videos

Publications

  • Atomisation technology for cigarette production

    Moistening, casing and flavouring

    For decades, Düsen-Schlick has been supplying systems manufacturers and cigarette producers with process-optimised atomisation technology. Moistening and flavouring are core processes in the primary stage of tobacco processing. These are ultimately responsible for the flavour and quality of the final product. Properly measuring flavouring additives and uniformly moistening leaves and ribs ensure optimum cutting and drying properties. This also creates benefits for the downstream (secondary) stage of cigarette production.

    Read more
  • Nozzle for the wood industry

    Professional spraying in industrial wood machining

    Professional spraying in industrial wood machining, especially the production of boards, is gaining increasingly in importance. This is not just because of the increasing cost of energy and raw materials; it is also because increasingly high demands for quality in the manufacture of wooden boards encourage the demand for suitable processes and possibilities, in order to apply liquids as homogeneously as possible onto prepared base materials.

    Read more

Your application, our nozzle.
Our promise: living for solutions.

Consultation, engineering, production and testing
At SCHLICK, you get everything from one source.
The ideal solution for your application.

More details

Phone +49 9565 9481-0
Mail info(at)myschlick.com